基于DOA聚类算法的ARM抗有源诱偏技术研究

有源诱偏技术是雷达对抗反辐射导弹的一种重要手段,可以大大降低反辐射导弹的作战效能。为提高对敌目标的精确打击能力,在分析闪烁诱饵诱偏原理的基础上,针对有源诱偏干扰下被动雷达测角精度与稳定度不高的问题,通过对有源诱偏信号的时域特征进行分析,提出一种基于脉冲前沿检测的DOA聚类分选算法,找出前沿超前的辐射源信号,实现了高性能抗有源诱偏干扰和高精度抗干扰测向。仿真结果表明,该技术可以有效对抗四点源有源诱偏干扰。     

用两端安装法检定热电偶

利用一种设计好的专用检具 ,使两束被检热电偶分别从检定炉的两端安装均可保证符合检定规程的要求 ,从而在不添置新设备的情况下 ,使检定热电偶效率大大提高。     

舰载机着舰时航迹稳定性研究

本文讨论了舰载飞机以小于有利速度着舰时的航迹稳定性问题。在分析飞机航迹稳定性的同时,还对油门杆控制、机动襟翼控制对改善航迹稳定性的作用进行了初步探讨;在此基础上还讨论了舰载飞机加装波束导引系统对着舰过程的影响原理。结果表明:采用油门杆控制、机动襟翼控制来改善着舰阶段的航迹稳定性是可行的:而且用以上两控制系统作为内环的自动驾驶仪在波束导引系统自动导引飞机着舰过程中,能控制飞机的飞行速度、高度,帮助驾驶员操纵。     

First estimations of the aerosol optical thickness using Langley Method at Southern Brazil (29.4°S, 53.8°W)

The first estimations of the aerosol optical thickness (AOT) using Langley Method at Southern Space Observatory (SSO) at Southern Brazil (29.4°S, 53.8°W) are presented. In addition to ozone and sulphur dioxide columns, AOT can be obtained using Brewer Spectrophotometer at specific wavelengths: 306.3, 310.1, 313.5, 316.8 and 320.1 nm. The AOT was obtained for the period from November/2002 to May/2003. Very low AOT averages were obtained, whose values were about 0.21 ± 0.03 at 306.3 nm, 0.21 ± 0.02 at 310.1 nm, 0.19 ± 0.02 at 313.5 nm, 0.20 ± 0.02 at 316.8 nm and 0.20 ± 0.02 at 320.0 nm for all period analysed. Different behaviour of AOT were obtained at two daily specific periods of aerosol accumulation, one in the afternoons from November/2002 to February/2003, caused mainly by a mild biomass burning season’s in the region and other in the mornings from March to May/2003, due the high relative humidity presented in the region studied.     

射线检测厚度宽容度的分析与测定

厚度宽容度是变截面工件射线检测的重要参数。本文分析了典型工件的厚度差,以及不同灵敏度级别的厚度宽容度。应用胶片特性曲线、曝光曲线,从实验角度测量了厚度宽容度,并对结果作了分析和讨论。     

蓄冰盘管冰层厚度测量及管外蓄冰性能实验

提出了一种新型简便的冰层厚度测量方法,该方法用测量冰层内温度分布的方法间接测量冰层动态厚度及冰层的相界面生长规律。对蓄冰盘管外结冰过程的实验研究表明,测量方法可靠,具有较高的测量精度;实验发现,蓄冰盘管外上部冰层生长较快,而下部冰层生长较慢,而在实验参数范围内管内乙二醇水溶液流量对冰层生长速度影响不大。     

精密加工中切削方向毛刺生成机理的研究(英文)

金属切削毛刺是切削加工中产生的常见现象之一。本研究以金属切削实验为基础 ,对二维精密切削中切削方向毛刺的形成过程、主要影响因素及其变化规律进行了系统的实验研究和相应的理论分析 ,结果表明 :( 1 )切削方向毛刺形成过程为正常切削、挠曲变形、弹性效应、继续切削和剪切断裂分离 ;( 2 )发现了切削方向毛刺形成过程中的切屑与工件表面剪切断裂分离的特殊现象 ;( 3)切削方向毛刺尺寸和形态随着切削条件和刀具几何参数的变化而变化。     

分布式光纤测温系统及高速数据采集与处理

分布式光纤测温系统是一种用于实时测量空间温度场分布的光纤传感系统 ,在系统中 ,光纤本身既是传输媒体也是传感媒体。讨论了系统的工作原理、设计思想、系统构成、高速数据采集以及瞬态采样平均技术 ,该系统已应用于石油测井。     

空-空导弹全向攻击随机最优制导律

本文从全向攻击的基本思想出发,用最优控制理论和卡尔曼滤波理论推导出能使空-空导弹进行全向攻击的随机最优制导律。该制导律包含目标加速度反馈,能对付机动目标;当目标作非机动飞行时,最优制导律是变比例系数的比例制导。计算机仿真结果表明:最优制导需用过载、终端脱靶量均小于比例制导,特别是当导弹从目标前方攻击时,其制导精度大大优于比例制导。     

Microstructure and Optical Characterization of Magnetron Sputtered NbN Thin Films

Some fundamental studies on the preparation, structure and optical properties of NbN films were carried out. NbN thin films were deposited by DC reactive magnetron sputtering at different N2 partial pressures and different substrate temperatures ranging from –50 ℃ to 600 ℃. X-ray diffraction analysis (XRD) and scanning electron microscopy (SEM) were employed to characterize their phase com- ponents, microstructures, grain sizes and surface morphology. Optical properties inclusive of refractive indexes, extinction coefficients and transmittance of the NbN films under different sputtering conditions were measured. With the increase in the N2 partial pressure, δ-NbN phase structure gets forming and the grain size and lattice constant of the cubic NbN increasing. The deposited NbN film has relatively high values of refractive index and extinction coefficient in the wavelength ranging from 240 nm to 830 nm. Substrate tem- perature exerts notable influences on the microstructure and optical transmittance of the NbN films. The grain sizes of the δ-NbN film remarkably increase with the rise of the substrate temperature, while the transmittance of the films with the same thickness decreases. Ultra-fine granular film with particle size of several nanometers forms when the substrate is cooled to –50 ℃, and a remarkable aug- mentation of transmittance could be noticed under so low a temperature.